LT33A

Product Features:

​SPLIT SLIDING TOP

• The lift platform extends an additional 8” allowing the table to shift in sections, eliminating the need to move the entire table for multi-positioning of larger loads.
• Platform easily locks and unlocks for fine adjustment of under vehicle placement.

REAR PLATFORM TILT ADJUSTMENT

• Conveniently adjust the table while under load with no need to remove battery, parts, or tools from platform.
• Fine adjust the tabletop with the object being removed or installed on the vehicle by positively tilting from the rear by up to 1°.
• To tilt, thread jack screws located at the rear of lift table upward using allen wrench or allen socket until correct angle is met.
• The table platform adjusts up to a 1° tilt angle to adapt to an uneven floor to be level with vehicle.

SIDE TO SIDE PLATFORM ALIGNMENT

• Easily shift tabletop left or right by 1” by unlatching red toggle handles on mid table and pushing or pulling “U” shaped handles until desired position is reached.
• Reclamp handles to lock the new platform position.

AIR RELEASED MECHANICAL LOCKS

• This redundant safety measure secures the lift (versus relying solely on the hydraulic system) with additional locking security.
• Standard with 9 locking positions at every 2-3/4”, the first lock is at a 32” table top height.

AIR SYSTEM CONTROLS

• Standard air over hydraulic pump is easier to operate and far more accessible than manual, electric or battery pumps.
• Air connection is conveniently placed for easy access
• Air lock release is operated by a simple toggle switch

FOOT PEDAL CONTROLS RAISE AND LOWER LIFT

• Push top of foot pedal to lower table
• Push rear of foot pedal to raise table

FIXTURING HOLES ON LIFT TOP SURFACE

• Threaded 10mm holes on tabletop for attaching mounts and brackets allow for a broader array of service functions.

MULTI-DIRECTIONAL CASTERS

• Large 360-degree casters with rotational locks provide easier movement and directional control.
• Locking a single caster enables easier movement versus swivel casters on only one end of lift.
• When moving the lift table, the casters may be locked directionally by pressing the blue foot tab downward.
• For ease of fore/aft movement only lock one front caster.
• Lock the lift table into desired position by pressing only the caster locking foot tab.

Contact a Rotary Distributor