Four Post Lift – ARO14 | Open Front Alignment Rack | Shockwave™ Equipped
2X Faster rise and descent than standard 4 post lifts.
The Shockwave™ DC power system gives you lower cost and more reliable operation while using two standard Group 24 batteries**. Shockwave™’s built in battery charger uses 110v power, eliminating the need for expensive 20v wiring – an installation savings of 80% or more!
Versatility: it’s the standard to which Rotary Lift’s four-post lifts are built. These lifts handle cars, vans, trucks – even light and medium duty commercial vehicles
- Open-End Design
- Dual Function Sentinel Lock™ System
- Air Filter/Regulator/Lubricator
- Single Piece Non-Welded Runway With Tracks For Rolling Jacks
- Internal Airline
- (2) 7,000 lbs. Capacity Rolling Jacks
- Stainless Steel Radius Gauges
- Rear Slip Plates
- Compatible With The New Technology Alignment Systems On The Market Today
- ALI Gold Certified (ARO14-X)
Available with Shockwave™ (ARO14SW) or without (ARO14).
Contact a Rotary Distributor
The AR014 comes standard with unmatched features, equipment and an array of productivity enhancing accessories.
Two available wheelbases allow any shop to service a wide range of vehicles from cars to full size trucks.
The SMO14 can be configured with Rotary’s exclusive Shockwave™
technology. Rise and descend twice as fast as standard lifts.
The ARO14 can be configured with standard features.
7,000 lbs. capacity rolling jacks are included.
Patented dual function Sentinel Lock™ system features a slack cable
guide arm that stays “on guard” to manage the lock latch.
Powder coated hammer tone paint finish
improves durability and paint life.
|Specification – ARO14||ARO14-L||ARO14-EL|
|Max. Two Wheel Align||171 1/4″||209″|
|Max Four Wheel Align||164 3/4″||164 3/4″|
|Min. Four Wheel Align||89″||89″|
|Rise||78 3/4″||78 3/4″|
|Length Overall||21′ 1″||23′ 10″|
|Width Overall||11′ 8 1/2″||11′ 8 1/2″|
|Inside of Columns||116 1/4″||116 1/4″|
|Between Front and Rear Columns||194 3/4″||227 3/4″|
|Height of Columns||9′ 1 1/16″||9′ 1 1/16″|
|Width of Runways||20″||20″|
|Height of Runways||7″||7″|
|Width Between Runways||43″||43″|
|Front of Runway to Center of Radius Gauge||Adj. 18″-24″||Adj. 18″-24″|
|Lifting Capacity||14,000 lbs.||14,000 lbs.|
|Motor||2 HP||2 HP|
|Voltage Single Phase||208v-230v||208v-230v|
|Time of Full Rise||65 seconds||65 seconds|
|Min. Bay Size||15’x26′||15’x28′|